[QUELAB CNC] CNC Digest, Vol 9, Issue 1

Wed Mar 1 18:50:50 PST 2017

John:
Primary thing would be going to Bentleys and pay invoice. (Or you can call them and authorize them to run total against card ypu used to register. They will email a paid receipt to you.)
Once somebody (I'm guessing it will end up being me). then item can be picked up at UTC.
It would be great if somebody in this group could help with that, but if not, Darrel Knudson has offered his help (with truck). Steven Hall has offered his truck and trailer to help. Maybe somebody from CNN group can coordinate with either gentleman? I may have some things to utilize them as well...

  On Wed, Mar 1, 2017 at 7:38 PM, John Anthes<jpanthes at comcast.net> wrote:   Was successful at Bentley Auction to purchase a workbench with two drawers
to make a place for our CNC machine.
I paid just 22.50 + buyers premium.
See attachment.

Great Idea, Darren and Eric...

I have no ability, however, to pick up and to re-locate to the Quelab?
(Am on an airplane Friday at 8 AM)

Can someone help?

Also got a benchtop magnified and lighted lamp on a clamp for our CNC bench
for $17:50 + buyer premium.

Dr. Opto
John
505-379-3438, cell

-----Original Message-----
From: CNC [mailto:cnc-bounces at quelab.net] On Behalf Of
cnc-request at quelab.net
Sent: Sunday, February 26, 2017 1:00 PM
To: cnc at quelab.net
Subject: CNC Digest, Vol 9, Issue 1

Send CNC mailing list submissions to
    cnc at quelab.net

To subscribe or unsubscribe via the World Wide Web, visit
    http://pepper.quelab.net/mailman/listinfo/cnc
or, via email, send a message with subject or body 'help' to
    cnc-request at quelab.net

You can reach the person managing the list at
    cnc-owner at quelab.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of CNC digest..."

Today's Topics:

  1. Tables and Workspace for the CNC Project (Eric Lee)
  2. Re: Tables and Workspace for the CNC Project (Darren)

----------------------------------------------------------------------

Message: 1
Date: Sat, 25 Feb 2017 16:37:11 -0700
From: Eric Lee <erlee at stanfordalumni.org>
To: cnc at quelab.net
Subject: [QUELAB CNC] Tables and Workspace for the CNC Project
Message-ID:
    <CABWT0otSAU_8JYPjwT+u96oXL5FvovBx0W5OMix7AUbu2TYzoA at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Hi All,

Talked to Darren today about tables and workspace for the 3 Axis CNC Router.

Darren said that a work space can be made available for the R&D,
construction and debugging work in the annex where we are currently renting
out space.

Darren also mentioned being able to find at auction or in his current
in-house stock, an appropriately sized work table for permanently placing
the CNC setup in the metal shop at a far lower cost than building one from
scratch from Home Depot plywood and 2 by 4s.

Darren will be at Quelab tomorrow on Sunday after the officer's meeting if
we want to talk to him about workspace and tables for the CNC project.

Eric
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://pepper.quelab.net/pipermail/cnc/attachments/20170225/73fd27de/attach
ment-0001.html>

------------------------------

Message: 2
Date: Sat, 25 Feb 2017 23:57:00 +0000 (UTC)
From: Darren <moodyguy33324 at yahoo.com>
To: Eric Lee <erlee at stanfordalumni.org>, "cnc at quelab.net"
    <cnc at quelab.net>
Subject: Re: [QUELAB CNC] Tables and Workspace for the CNC Project
Message-ID: <1342954842.1100679.1488067020601 at mail.yahoo.com>
Content-Type: text/plain; charset="utf-8"

Bentleys is have a huge three day auction next week of a major government
subcontractor. In looking through the catalog, I see some thigs taht would
be good for Quelab.
In the case of the CNC work, I am thinking about a cubicle in the Annex (in
addition to others). This was there is a clearly defined, semi-private space
for work on it.
Example of cubicles being offered (right now, some have no bids so
conceivably, they could be $1 per whole cubice section- including desk(s)
inside (I think). I am going to look at them on
Monday).https://auctionsouthwest.hibid.com/catalog/93162/utc-aerospace-plant
-auction---february-28---march-2--2017/?q=cubicle

Ideas for tables / benched for final placement of router:
https://auctionsouthwest.hibid.com/lot/29595878/small-cpu-table/?q=table&cpa
ge=2&ref=catalog

https://auctionsouthwest.hibid.com/lot/30122409/work-table/?q=table&cpage=2&
ref=catalog

https://auctionsouthwest.hibid.com/lot/30246083/pro-line-white-work-bench/?q
=bench&ref=catalog

https://auctionsouthwest.hibid.com/lot/30246084/pro-line-blue-work-bench/?q=
bench&ref=catalog

https://auctionsouthwest.hibid.com/lot/30246084/pro-line-blue-work-bench/?q=
bench&ref=cataloghttps://auctionsouthwest.hibid.com/lot/29559435/esd-work-ta
ble-station--30-x48-x30-/?q=station&ref=catalog
Leveling feet can be unscrewed from bottom and locking casters can be
inserted.

There will be tons of these style magnifying lights in the auction as well.
What are thoughts of adding one of these to station (And maybe a couple
extras just for spare bulbs if nothing
else?)https://auctionsouthwest.hibid.com/lot/29559461/intertek-luna-pro-magn
ifying-light/?q=light&ref=catalog

Just some ideas....
Darren
      From: Eric Lee <erlee at stanfordalumni.org>
 To: cnc at quelab.net
 Sent: Saturday, February 25, 2017 4:37 PM
 Subject: Tables and Workspace for the CNC Project

Hi All,
Talked to Darren today about tables and workspace for the 3 Axis CNC Router.
Darren said that a work space can be made available for the R&D,
construction and debugging work?in the annex where we are currently renting
out space.
Darren also mentioned being able to find at auction or?in his
current?in-house stock,?an appropriately sized work table for permanently
placing the CNC setup in the metal shop at a far lower cost than building
one from scratch from?Home Depot?plywood and 2 by 4s.
Darren will be at Quelab tomorrow on Sunday after the officer's meeting if
we want to talk to him about workspace and tables for the CNC project.
Eric

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://pepper.quelab.net/pipermail/cnc/attachments/20170225/24ce9a6e/attach
ment-0001.html>

------------------------------

Subject: Digest Footer

_______________________________________________
CNC mailing list
CNC at quelab.net
http://pepper.quelab.net/mailman/listinfo/cnc

------------------------------

End of CNC Digest, Vol 9, Issue 1
*********************************
_______________________________________________
CNC mailing list
CNC at quelab.net
http://pepper.quelab.net/mailman/listinfo/cnc

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://pepper.quelab.net/pipermail/cnc/attachments/20170302/0a48b20d/attachment-0003.html>