[QUELAB CNC] CNC Digest, Vol 7, Issue 1

Fri Jun 24 13:06:46 PDT 2016

Geoff,
All the parts are on site. I replaced the broken original collet with two
replacements. Eric, Morgan and I checked out the fit up with the BOSCH Colt
router and with the 1/4 dia end mill cutters I supplied over a 1 month or so
ago.
Morgan had said something about routing the wiring.
To me it seemed about ready to start testing software and to do some initial
parts.

Have been out of town mostly. Have returned last Saturday.

Would recognize the parts but don't know about storage location.

If requested can come down for a coordination meeting if helpful.

Standing by ....
John Dr. Opto Anthes
505-379-3438, cell, is quick response

-----Original Message-----
From: CNC [mailto:cnc-bounces at quelab.net] On Behalf Of
cnc-request at quelab.net
Sent: Friday, June 24, 2016 1:00 PM
To: cnc at quelab.net
Subject: CNC Digest, Vol 7, Issue 1

Send CNC mailing list submissions to
	cnc at quelab.net

To subscribe or unsubscribe via the World Wide Web, visit
	http://pepper.quelab.net/mailman/listinfo/cnc
or, via email, send a message with subject or body 'help' to
	cnc-request at quelab.net

You can reach the person managing the list at
	cnc-owner at quelab.net

When replying, please edit your Subject line so it is more specific than
"Re: Contents of CNC digest..."

Today's Topics:

   1. Shapeoko (July 2016) (Geoff Nicholson)
   2. Re: Shapeoko (July 2016) (John Benedetto)

----------------------------------------------------------------------

Message: 1
Date: Fri, 24 Jun 2016 10:44:29 -0600
From: Geoff Nicholson <Demonsthenes at meme-complex.com>
To: cnc at quelab.net
Subject: [QUELAB CNC] Shapeoko (July 2016)
Message-ID:
	<CAPhgvOrose02iUH_RBsF24V9E47aSffYfyZMgNEdv0UsEQmZ+Q at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Greetings!

I've found myself with some free time (hah!) and I would like to finally get
the Shapeoko up and running all the way, without any of these pesky
'breaks', or 'internships' or even 'jobs' getting in the way.

When I was looking at the device last Tuesday, I saw all the gantry and some
of the endmills... but no spindle.  Where are all the parts?  We need to 1)
take a good inventory of our stuff and 2) get the darn thing going.

I realise that morgan was one of the last people to have their hands on the
project, but with morgan on internship out-of-town the project sort of
stopped.

Thanks!

-- geoff
-- quelab.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://pepper.quelab.net/pipermail/cnc/attachments/20160624/173bd125/attach
ment-0001.html>

------------------------------

Message: 2
Date: Fri, 24 Jun 2016 17:26:03 +0000
From: John Benedetto <jbenedet at unm.edu>
To: Quelab CNC SIG <cnc at quelab.net>
Subject: Re: [QUELAB CNC] Shapeoko (July 2016)
Message-ID:

Content-Type: text/plain; charset="utf-8"

Geoff,

There should be a BOSCH Colt router sitting around there somewhere, too.
The last thing Andres bought was a Bosch Colt router adapter, so that is our
current spindle.  The collet broke, and I think Dr. Opto bought another
(not sure if it made its way down to the Quelab yet or not).  I thought it
was at the base of the table in a blowmold case.

JT

From: CNC [mailto:cnc-bounces at quelab.net] On Behalf Of Geoff Nicholson
Sent: Friday, June 24, 2016 10:44 AM
To: cnc at quelab.net
Subject: [QUELAB CNC] Shapeoko (July 2016)

Greetings!

I've found myself with some free time (hah!) and I would like to finally get
the Shapeoko up and running all the way, without any of these pesky
'breaks', or 'internships' or even 'jobs' getting in the way.

When I was looking at the device last Tuesday, I saw all the gantry and some
of the endmills... but no spindle.  Where are all the parts?  We need to 1)
take a good inventory of our stuff and 2) get the darn thing going.

I realise that morgan was one of the last people to have their hands on the
project, but with morgan on internship out-of-town the project sort of
stopped.

Thanks!

-- geoff
-- quelab.net<http://quelab.net>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://pepper.quelab.net/pipermail/cnc/attachments/20160624/7f902f02/attach
ment-0001.html>

------------------------------

Subject: Digest Footer

_______________________________________________
CNC mailing list
CNC at quelab.net
http://pepper.quelab.net/mailman/listinfo/cnc

------------------------------

End of CNC Digest, Vol 7, Issue 1
*********************************